LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (15 Engine - Cylinder Head, Valve Drive 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 155519 Removing And Installing Solenoid Hydraulic Valve For Valve Lift Adjustment (V8 BITURBO) >> Removing Solenoid Hydraulic Valve For Valve Lift Adjustment (Right Cylinder Bank) >> Removing Solenoid Hydraulic Valve For Valve Lift Adjustment (Cylinder 2)

Removing Solenoid Hydraulic Valve For Valve Lift Adjustment (Cylinder 2)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Only for intake side of cylinder 2: 

  1. Remove partial load vent line for oil mist separator -2-  .
    1. 1.1 Press release buttons on both sides and loosen adapter -1-  .
    2. 1.2 Remove partial load vent line -2-  .
      G15823757Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Partial load vent line for oil mist separator

  2. Lift up moulded part -2-  .
    1. 2.1 Release and disconnect electric plug connection -1-  .
    2. 2.2 Lift up moulded part -2-  for easier access to the solenoid hydraulic valve for valve lift adjustment.
      G15823758Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Intake side of cylinder 2

  3. Unscrew fastening screws -1-  and remove solenoid hydraulic valve for valve lift adjustment -2-  .
    G15823759Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Solenoid hydraulic valve for valve lift adjustment

    Only for outlet side of cylinder 2: 

  4. Remove partial load vent line for oil mist separator -2-  .
    1. 4.1 Press release buttons on both sides and loosen adapter -1-  .
    2. 4.2 Remove partial load vent line -2-  .
    G15823760Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Partial load vent line

  5. Remove engine wire harness guide -2-  .
    1. 5.1 Unclip, release and disconnect electric plug connection -1-  .
    2. 5.2 Open engine wire harness guide -2-  and remove wire harness.
    3. 5.3 Screw off fastening nuts -3-  .
    4. 5.4 Remove engine wire harness guide -2-  .
    G15823761Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Engine wire harness guide

  6. Lift up moulded part -2-  .
    1. 6.1 Release and disconnect electric plug connection -1-  .
    2. 6.2 Lift up moulded part -2-  for easier access to the solenoid hydraulic valve for valve lift adjustment.
    G15823762Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Outlet side of cylinder 2

  7. Unscrew fastening screws -1-  and remove solenoid hydraulic valve for valve lift adjustment -2-  .
G15823763Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Solenoid hydraulic valve for valve lift adjustment

scientia non olet · About LEMON Manuals