Removing Solenoid Hydraulic Valve For Valve Lift Adjustment (Cylinder 8)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Only for intake side of cylinder 8:

Lift up moulded part -3- .
1. 1.1 Release and disconnect electric push-on connector -1- for ignition coil.
2. 1.2 Release and disconnect electric push-on connector -2- for solenoid hydraulic valve for valve lift adjustment.
3. 1.3 Lift up moulded part -3- for easier access to the solenoid hydraulic valve for valve lift adjustment.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Intake side of cylinder 8
Unscrew fastening screws -1- and remove solenoid hydraulic valve for valve lift adjustment -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Solenoid hydraulic valve for valve lift adjustment

Only for outlet side of cylinder 8:
Lift up moulded part -3- .
1. 3.1 Unclip electric push-on connector -1- from retaining clip and set it aside.
2. 3.2 Release and disconnect electric push-on connector for solenoid hydraulic valve for valve lift adjustment -2- .
3. 3.3 Lift up moulded part -3- for easier access to the solenoid hydraulic valve for valve lift adjustment.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Outlet side of cylinder 8
Unscrew fastening screws -1- and remove solenoid hydraulic valve for valve lift adjustment -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Solenoid hydraulic valve for valve lift adjustment