LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (15 Engine - Cylinder Head, Valve Drive 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 154719 Removing And Installing Guide And TENSIONING Rails (V8 BITURBO) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install lower chain housing cover.

    > 153319 REMOVING AND INSTALLING LOWER CHAIN HOUSING COVER (V8 BITURBO) 

  2. On the relevant side: 
    1. 2.1 Install cylinder head.

      > 157019 REMOVING AND INSTALLING CYLINDER HEAD (V8 BITURBO) 

    2. 2.2 Install cylinder head cover.

      > 158219 REMOVING AND INSTALLING CYLINDER HEAD COVER (V8 BITURBO) 

    3. 2.3 Install camshaft actuators.

      > Refer to the appropriate Service Information for Removing and installing actuator for camshaft

  3. Install the engine.

    > 100119 REMOVING AND INSTALLING ENGINE

scientia non olet · About LEMON Manuals