LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (15 Engine - Cylinder Head, Valve Drive 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 154719 Removing And Installing Guide And TENSIONING Rails (V8 BITURBO) >> Installing Guide And TENSIONING Rails >> Installing Guide And Tensioning Rails For Cylinder Bank 2

Installing Guide And Tensioning Rails For Cylinder Bank 2

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Check length of timing chains:

  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1 Fit long timing chain.
    2. 1.2 Fit and tighten screws -3-  .

      > Tightening torque 9 Nm (6.5 ftlb.) 

      G15823756Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Guide and tensioning rails for cylinders 5 to 8

scientia non olet · About LEMON Manuals