Technical Values
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Thrust-bearing screws securing lower part of crankcase to upper part of crankcase | M10 x 111/Step 1 | Tightening torque | 15 Nm (11 ftlb.) | ||
| Thrust-bearing screws securing lower part of crankcase to upper part of crankcase | Step 2 | Tightening torque | 30 Nm (22 ftlb.) | ||
| Thrust-bearing screws securing lower part of crankcase to upper part of crankcase | Step 3 | Torque angle | + 200° | ||
| Thrust-bearing screws securing lower part of crankcase to upper part of crankcase | Step 4: Loosen (by about 2 turns) | Torque angle | 720° | ||
| Thrust-bearing screws securing lower part of crankcase to upper part of crankcase | Step 5 | Tightening torque | 30 Nm (22 ftlb.) | ||
| Thrust-bearing screws securing lower part of crankcase to upper part of crankcase | Step 6 | Torque angle | 70° | ||
| Thrust-bearing screws securing lower part of crankcase to upper part of crankcase | M8 x 30 | Initial tightening | 10 Nm (7.5 ftlb.) | ||
| Thrust-bearing screw securing lower part of crankcase to upper part of crankcase | Final tightening | + 50° |