LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (21 Exhaust Gas Turbocharging 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 219319 Removing And Installing Boost Pressure Control Cycle Valve >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove strut.

    > 408619 REMOVING AND INSTALLING STRUT

  2. Remove engine cover (design cover).

    > 108319 REMOVING AND INSTALLING ENGINE COVER

  3. Remove torque support.

    > 103719 REMOVING AND INSTALLING TORQUE SUPPORT

  4. Remove front trim panel (engine compartment) at the relevant side.

    > 700219 REMOVING AND INSTALLING FRONT TRIM PANEL (ENGINE COMPARTMENT)