LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (21 Exhaust Gas Turbocharging 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 219019 Removing And Installing Pressure Sensor (V8 BITURBO) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Push pressure hose -1-  onto the pressure pipe -3-  and secure with a screw-type clamp -4-  .
    G15879406Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Pressure hose

  2. Install front trim panel (engine compartment) on the relevant side.

    > 700219 REMOVING AND REINSTALLING FRONT TRIM PANEL (ENGINE COMPARTMENT)

  3. Install engine cover (design cover).

    > 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) (V8 BITURBO)