LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (21 Exhaust Gas Turbocharging 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 219019 Removing And Installing Pressure Sensor (V8 BITURBO) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove engine cover (design cover).

    > 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) (V8 BITURBO)

  2. Remove front trim panel (engine compartment) on the relevant side.

    > 700219 REMOVING AND REINSTALLING FRONT TRIM PANEL (ENGINE COMPARTMENT)

  3. Pull pressure hose -1-  off pressure pipe -3-  .
    1. 3.1 Loosen screw-type clamp -4-  .
    2. 3.2 Pull off pressure hose -1-  and clamp it behind the strut -2-  .
      G15879403Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Pressure hose

scientia non olet · About LEMON Manuals