LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (10 Engine - Crankcase, Suspension 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 105519 Removing And Installing (Left) Oil Mist Separator (V8 BITURBO) >> Installing (Left) Oil Mist Separator

Installing (Left) Oil Mist Separator

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order.
  2. Replace seals.
  3. Screw in and tighten screws in the specified sequence -2 to 7-  > Tightening torque 9 Nm (6.5 ftlb.) 
Fig 1: Oil Mist Separator Screws Tightening Sequence
G15823661Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screwing in and tightening screws

scientia non olet · About LEMON Manuals