LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (10 Engine - Crankcase, Suspension 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 103719 Removing And Installing Torque Support >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove engine cover.

    > 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) 

  2. Remove front trim panel (engine compartment) at the right.

    > 700219 REMOVING AND REINSTALLING FRONT TRIM PANEL (ENGINE COMPARTMENT)

  3. Loosen strut on the right-hand side.

    > 408619 REMOVING AND INSTALLING STRUT

scientia non olet · About LEMON Manuals