LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (17 - Engine - Lubrication 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 174019 Removing And Installing Oil Cooler (V8 BITURBO) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Des... Type Basic val... Toleranc... Toleranc...
Fastening screws for front part & rear part of heat shield M6 x 12 Tightening torque 9 Nm (6.5 ftlb.)    
Screws for oil cooler M6 x 20 Initial tightening 5 Nm (3.5 ftlb.)    
Screws for oil cooler M6 x 20 Final tightening + 9 Nm (6.5 ftlb.)    
scientia non olet · About LEMON Manuals