LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (17 - Engine - Lubrication 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 174019 Removing And Installing Oil Cooler (V8 BITURBO) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install rear part of shield -2-  .
    1. 1.1 Position rear part of shield -2-  .
    2. 1.2 Screw in and tighten screws -1-  in rear part of shield -2-  > Tightening torque 9 Nm (6.5 ftlb.) 
    G15823914Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Rear part of shield

  2. Install catalytic converters.

    > 267319 REMOVING AND INSTALLING CATALYTIC CONVERTER (V8)

  3. Installing both turbochargers.

    > 213019 REMOVE AND INSTALL TURBOCHARGER

  4. Check engine oil.

    > Checking engine oil 

  5. Check cooling system.

    > 190101 CHECKING COOLING SYSTEM