LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (17 - Engine - Lubrication 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 170519 Removing And Installing Oil Pressure Switch (V8 BITURBO) >> Installing Oil Pressure Switch

Installing Oil Pressure Switch

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order.
  2. Replace sealing ring.
  3. Screw in and tighten oil pressure switch > Tightening torque 20 Nm (15 ftlb.) 
  4. Screw in and tighten screws in heat shield > Tightening torque 9 Nm (6.5 ftlb.) 
scientia non olet · About LEMON Manuals