Removing Oil-Pressure Sender
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen clamps -1-
and remove suction hose -2-
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Suction hose
- Unscrew screws -1-
and press cable duct -2-
aside.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Cable duct
Information
Re-install oil-pressure sender as quickly as possible to avoid losing too much oil.
- Remove oil-pressure sender.
- 3.1 Release and unplug electric plug connection -1-
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Electric plug connection for oil-pressure sender
- 3.2 Collect emerging engine oil.
- 3.3 Unscrew oil-pressure sender using > T40363 - socket wrench a/f 24
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Oil-pressure sender