Tightening Torques For PASM Control Unit
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance |
|---|---|---|---|---|
| PASM control unit to control unit holder | Item 4: Lens-head screw, M5 x 12 | Tightening torque | 5.6 Nm (4.1 ftlb.) | |
|
Removing PASM control unit from holder |
||||
| Control unit holder to holder | Item 2: Hexagon nut, M6 | Tightening torque | 8 Nm (6 ftlb.) | |
|
Loosening PASM control unit with holder |
||||