LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (47 Brakes - Brake Hydraulic System, Regulator, Booster 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 473956 Replacing Brake CALLIPER Screws >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Des... Type Basic val... Toleranc... Toleranc...
Brake calliper screws on pad retaining pin The brake calliper screws may only be replaced in the event of a complaint (corrosion)/always replace screws after dismantling! Initial tightening 10 Nm (7.4 ftlb.)
G15861137Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Brake calliper screws on pad retaining pin
Brake calliper screws on pad retaining pin The brake calliper screws may only be replaced in the event of a complaint (corrosion)/always replace screws after dismantling! Final tightening + 30° + 4°
G15861138Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Brake calliper screws on pad retaining pin