LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (48 Steering (4.0L Turbo Hybrid -- 971 - PANAMERA (971))) >> WM, 488319 Removing And Installing Servo Motor For Rear Axle Steering >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Des... Type Basic val... Toleranc... Toleranc...
Servo motor for rear axle steering to rear axle housing Hexagon-head bolt, M12 x 1.5 x 100 (top)/M12 x 1.5 x 75 (bottom); observe tightening sequence!/Always replace screws following removal! Initial tightening 70 Nm (52 ftlb.)
G15861223Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for servo motor for rear axle steering
Servo motor for rear axle steering to rear axle housing Hexagon-head bolt, M12 x 1.5 x 100 (top)/M12 x 1.5 x 75 (bottom); observe tightening sequence!/Always replace screws following removal! Final tightening + 90°
G15861224Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for servo motor for rear axle steering
Tie rod to rear axle housing/servo motor for rear axle steering (toe eccentric adjuster) Eccentric screw, M12 x 1.5 with eccentric washer and hexagon nut Tightening torque 100 Nm (74 ftlb.)