LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (48 Steering (4.0L Turbo Hybrid -- 971 - PANAMERA (971))) >> WM, 485319 Removing And Installing Bellows For Steering-Gear Housing >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install front-axle support (rear section)

    > 400819 REMOVING AND INSTALLING FRONT-AXLE SUPPORT

  2. Install tie-rod ball

    > WM, 488119 REMOVING AND INSTALLING TIE-ROD BALL 

  3. Align the suspension and make adjustments if necessary

    > WM, 449503 PERFORMING FRONT AND REAR SUSPENSION ALIGNMENT

scientia non olet · About LEMON Manuals