LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (48 Steering (4.0L Turbo Hybrid -- 971 - PANAMERA (971))) >> WM, 485319 Removing And Installing Bellows For Steering-Gear Housing >> Removing And Installing Bellows For Steering-Gear Housing >> Installing Bellows For Steering-Gear Housing

Installing Bellows For Steering-Gear Housing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information 

During fitting, make sure that the steering-gear housing bellows is not twisted and that the clamp lugs are easy to reach.

  1. Fit inner clamp using > V.A.G 1275A - Hose clip pliers  > Inner clamp 
    G15861210Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Inner clamp

  2. Fit outer clamp -arrow-  using > VAS 6890 - Spring Band Clamp Pliers  .
    G15861211Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Outer clamp

scientia non olet · About LEMON Manuals