LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (48 Steering (4.0L Turbo Hybrid -- 971 - PANAMERA (971))) >> WM, 481319 Removing And Installing Steering Column Casing >> Removing Steering Column Casing

Removing Steering Column Casing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unscrew screws -2-  and unclip trim panel -3-  .
    G15861189Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Loosening trim panel

  2. Turn the steering wheel and unclip upper part of steering column casing -1-  through the openings -2-  using a suitable tool.
    G15861190Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Unclipping upper part

  3. Disengage restraining straps on rear steering column casing and remove casing.

    Vehicles with electrically adjustable steering column: 

  4. Unclip switch for steering column adjustment, disconnect electric plug connection and remove switch.

    Vehicles with manually adjustable steering column: 

  5. Move lever for steering column adjustment downwards.
  6. Turn the steering wheel and unscrew screws -4-  .
  7. Unscrew screw -5-  and remove lower part of steering column casing -1-  .
    G15861191Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing lower part

scientia non olet · About LEMON Manuals