Assembling Steering Wheel
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Information
Multi-functional switches can be used immediately after installation. They do not need to be coded.
- Installation is performed in reverse order. Pay particular attention to the following:
Tightening torque for screws on rear cover: > Tightening torque 2.7 Nm (2 ftlb.)
Tightening torque for screws on rocker switches: > Tightening torque 2.5 Nm (2 ftlb.)
Tightening torque for screws on main cover: > Tightening torque 2 Nm (1.5 ftlb.)
Tightening torque for screws on multi-functional switches: > Tightening torque 0.45 Nm (0.25 ftlb.)
Tightening torque for screws on contact bridge: > Tightening torque 6 Nm (4.5 ftlb.)