LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (19 - Engine - Cooling 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 199219 Removing And Installing Temperature Sensor For Supply Line >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install heat shield -1-  .
    G15824138Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Heat shield for high-voltage battery

    1. 1.1 Tighten screws -2-  .
  2. Install left tailpipe cover.

    > 263519 REMOVING AND INSTALLING TAILPIPE COVERS

  3. Install rear underbody cover.

    > 519419 Removing and installing cover for rear underbody - information on "Installing" 

  4. Check coolant level of low-temperature circuit and correct it if necessary.
scientia non olet · About LEMON Manuals