Installing Temperature Sensor For Supply Line
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order.
- 1.1 Check O-ring and replace it if necessary.
- 1.2 Coat O-ring with Kluberplus Gel (Part No. 000.043.205.93).
- 1.3 Tighten screw.
Tightening torque: > Tightening torque 10 Nm (7.5 ftlb.)