LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (19 - Engine - Cooling 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 197819 Removing And Installing Low-Temperature Circuit Temperature Sensor (TW 10) >> Removing Low-Temperature Circuit Temperature Sensor >> Removing Low-Temperature Circuit Temperature Sender

Removing Low-Temperature Circuit Temperature Sender

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Hot fluid 
  • Danger of scalding 

    → Avoid contact with hot fluid.

    → Wear personal protective gear.

  1. Loosen holder -1-  .
    G15824131Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Holder

    1. 1.1 Unscrew nut -2-  .
    2. 1.2 Unscrew screws -3-  .
    3. 1.3 Move holder -1-  so that the low-temperature circuit temperature sender is accessible. Make sure not to damage any lines.
  2. Remove low-temperature circuit temperature sender -1-  .
    G15824132Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Low-temperature system temperature sender (TW 10)

    1. 2.1 Release and disconnect cable plug -2-  .
    2. 2.2 Pull off retaining clip -3-  .
    3. 2.3 Pull low-temperature circuit temperature sender -1-  out of line connection -4-  .
    4. 2.4 Catch escaping coolant and close off line connection -4-  using a suitable stopper.
scientia non olet · About LEMON Manuals