LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (19 - Engine - Cooling 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 197819 Removing And Installing Coolant Temperature Sensor (Engine Outlet T2) (V8 BITURBO) >> Removing Coolant Temperature Sensor

Removing Coolant Temperature Sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect pressure hose for charge-air cooler -1-  at the pressure pipe.
    1. 1.1 Loosen screw-type clamp on pressure hose for charge-air cooler -2-  at the pressure pipe.
    2. 1.2 Press pressure hose for charge-air cooler -1-  at the pressure pipe aside.
    G15824124Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Disconnecting pressure hose for charge-air cooler at the pressure pipe

  2. Release and unplug electric plug connection -1-  .
    G15824125Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Releasing and pulling off electric plug connection

  3. Remove coolant temperature sensor -1-  .
    1. 3.1 Place cloths underneath.
    2. 3.2 Unscrew and remove screw -2-  .
    3. 3.3 Remove coolant temperature sensor -1-  .
G15824126Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing coolant temperature sensor