Removing Heat EXCHANGER For High-Temperature And Low-Temperature System

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect coolant hoses -1- .
1. 1.1 Loosen spring band clamps -2- using > VAS 6890 - Spring Band Clamp Pliers .
2. 1.2 Disconnect coolant hoses -1- from heat exchanger for high-temperature and low-temperature system -3- and set them aside.
3. 1.3 Catch escaping coolant and close off line connections using suitable stoppers.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Coolant hoses for heat exchanger for high-temperature and low-temperature system
Remove heat exchanger for high-temperature and low-temperature system -1- .
1. 2.1 Unscrew nuts -2- .
2. 2.2 Guide heat exchanger for high-temperature and low-temperature system -1- out of the holder -3- and remove it.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Heat exchanger for high-temperature and low-temperature system