Installing Heat EXCHANGER For High-Temperature And Low-Temperature System

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Install heat exchanger for high-temperature and low-temperature system -1- .

1.1 Position heat exchanger for high-temperature and low-temperature system -1- at the holder -3- .

1.2 Screw on and tighten nuts -2- .

> Tightening torque 8 Nm (6 ftlb.)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Heat exchanger for high-temperature and low-temperature system

Connect coolant hoses -1- .
1. 2.1 Fit coolant hoses -1- on heat exchanger for high-temperature and low-temperature system -3- .
2. 2.2 Fasten spring band clamps -2- using > VAS 6890 - Spring Band Clamp Pliers .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Coolant hoses for heat exchanger for high-temperature and low-temperature system