LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (19 - Engine - Cooling 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 195519 Removing And Installing Coolant Regulator Housing (V8 BITURBO) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install cooling fan housing (radiator frame).

    > 192019 REMOVING AND INSTALLING COOLING FAN HOUSING (RADIATOR FRAME) 

  2. Install pressure pipes at the left and right.

    > 214119 REMOVING AND INSTALLING PRESSURE PIPE (V8 BITURBO)

  3. Fill up coolant.

    > 193817 DRAINING AND FILLING COOLANT 

scientia non olet · About LEMON Manuals