Installing Coolant Regulator Housing

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Seals for coolant regulator housing

Fig 1: Coolant Regulator Housing Screws Tightening Sequence

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Coolant regulator housing

1. 2.1 Positioning coolant regulator housing -1-  .
2. 2.2 Screw in screws -2 to 10-  .
3. 2.3 Tighten screws -2 to 4-  (M6 x 40).

   > Tightening torque 9 Nm (6.5 ftlb.) 

4. 2.4 Tighten screws -5 to 10-  (M6 x 25).

   > Tightening torque 9 Nm (6.5 ftlb.) 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Guide tube for oil dipstick

1. 3.1 Replace seal on guide tube for oil dipstick.
2. 3.2 Insert guide tube for oil dipstick -1-  in direction of -Arrow-  .
3. 3.3 Tighten screw on guide tube for oil dipstick -2-  .

   > Tightening torque 9 Nm (6.6 ftlb.) 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Cable duct

1. 4.1 Position cable duct -2-  .
2. 4.2 Screw in and tighten screws -1-  .

   > Tightening torque 9 Nm (6.5 ftlb.) 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Right coolant hose

1. 5.1 Push coolant hose at the right -2-  onto both connections.
2. 5.2 Fasten spring band clamps -1-  using > VAS 6890 - spring band clamp pliers  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Left coolant hose

1. 6.1 Push coolant hose -2-  onto connection.
2. 6.2 Fasten spring band clamp -1-  using > VAS 6890 - spring band clamp pliers  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Vacuum line holder

1. 7.1 Position vacuum line -2-  .
2. 7.2 Screw in and tighten screw -1-  .

   > Tightening torque 9 Nm (6.6 ftlb.) 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Vacuum line

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric plug connection

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Air guide