Removing Coolant Reservoir
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Hot fluid
- Danger of scalding
→ Avoid contact with hot fluid.
→ Wear personal protective gear.
- Disconnect electric line -1-
.
- 1.1 Release and disconnect cable plug -2- .
- 1.2 Unclip clip -3- and set electric line -1- aside.
Electric line
- Loosen coolant reservoir -1-
from the strut.
- 2.1 Release and disconnect cable plug -2- .
- 2.2 Loosen spring band clamp -3- using > VAS 6890 - Spring Band Clamp Pliers and pull off coolant hose -4- .
- 2.3 Catch escaping coolant and close off line connections using suitable stoppers.
- 2.4 Unscrew screws on holder -5- .
Coolant reservoir on strut
- Remove strut -1-
.
- 3.1 Unscrew nut on line bracket -2- .
- 3.2 Unscrew screws on strut -3-
.
- 3.2.1 Replace screws.
- 3.3 Lift up strut -1- and disengage coolant reservoir from the holder.
- 3.4 Remove strut -1- .
Strut
- Remove coolant reservoir -1-
.
- 4.1 Lift up coolant reservoir -1- so that the coolant hose is accessible.
- 4.2 Release safety clip -2- on the quick connector and pull off coolant hose -3- .
- 4.3 Catch escaping coolant and close off line connections using suitable stoppers.
- 4.4 Remove coolant reservoir -1- .
Coolant reservoir