Installing Coolant Reservoir

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Install coolant reservoir -1- .
1. 1.1 Push on coolant hose and lock safety clip -2- on the quick connector.
2. 1.2 Position coolant reservoir -1- .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Coolant reservoir

Install strut -1- .

2.1 Insert holder into the coolant reservoir.
2.2 Position line bracket and screw on and tighten nut -2- .
> Tightening torque 8 Nm (6 ftlb.)

2.3 Position strut -1- and screw in and tighten new screws -3- .

> Initial tightening 20 Nm (15 ftlb.)

> Final tightening + 90°

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Strut

Secure coolant reservoir -1- .
1. 3.1 Screw in and tighten screws on holder -5- .
  > Tightening torque 8 Nm (6 ftlb.)
2. 3.2 Push on coolant hose -4- and tighten spring band clamp -3- using > VAS 6890 - Spring Band Clamp Pliers .
3. 3.3 Connect and lock cable plug -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Coolant reservoir on strut