LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (63 Bumper - Coupe -- 971 - PANAMERA (971)) >> WM, 635719 Removing And Installing Rear Retaining Strip >> Technical Values

Technical Values

WARNING: This page is about a different car, the 2023 Porsche Panamera and 2022 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Des... Type Basic val... Toleranc... Toleranc...
Screws for rear retaining strip side Item 1 Tightening torque 3.5 Nm (2.6 ftlb.)    
G15864666Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screws for rear retaining strip at the sides
Nut on retaining strip for tail light Item 7 Tightening torque 3.5 Nm (2.6 ftlb.)    
G15864667Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Nuts for holder with heat protection
Nuts on centre retaining strip Item 1 Tightening torque 6 Nm (4.4 ftlb.)    
G15864668Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Nuts on centre retaining strip
Nut on centre retaining strip bottom Item 1 Tightening torque 3.5 Nm (2.6 ftlb.)    
G15864669Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Nut on centre retaining strip at the bottom
Screw for retaining strip with heat protection Item 5 Tightening torque 2.5 Nm (1.8 ftlb.)    
G15864670Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screw for retaining strip on rear light
Nut on retaining strip with heat protection Item 6 Tightening torque 9 Nm (6.6 ftlb.)    
G15864671Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Nuts for holder with heat protection