LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (63 Bumper - Coupe -- 971 - PANAMERA (971)) >> WM, 635019 Removing And Installing Rear Bumper >> Installing Rear Bumper

Installing Rear Bumper

WARNING: This page is about a different car, the 2023 Porsche Panamera and 2022 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Use new screws following removal.

  1. Installation is performed in reverse order. Pay particular attention to the following:

Tightening torque for screw on rear bumper: > Initial tightening 20 Nm (15 ftlb.)  + > Final tightening + 45° 

scientia non olet · About LEMON Manuals