LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (63 Bumper - Coupe -- 971 - PANAMERA (971)) >> WM, 631719 Removing And Installing Retaining Strip >> Installing Retaining Strip >> Installing Retaining Strip On Wing

Installing Retaining Strip On Wing

WARNING: This page is about a different car, the 2023 Porsche Panamera and 2022 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

Tightening torque for screw securing retaining strip to wing: > Tightening torque 2.8 Nm (2.1 ftlb.) 

scientia non olet · About LEMON Manuals