LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (63 Bumper - Coupe -- 971 - PANAMERA (971)) >> WM, 631519 Removing And Installing Front Apron >> Installing Front Apron >> Installing Front Bumper

Installing Front Bumper

WARNING: This page is about a different car, the 2023 Porsche Panamera and 2022 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in reverse order.
  2. Screw in and tighten screws securing front bumper to mounting bracket > Tightening torque 5.5 Nm (4.1 ftlb.) 
  3. Screw in and tighten screws securing front bumper to wing at the left and right > Tightening torque 2.8 Nm (2 ftlb.) (2.1 ftlb.) 
scientia non olet · About LEMON Manuals