LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (63 Bumper - Coupe -- 971 - PANAMERA (971)) >> WM, 631019 Removing And Installing Front Bumper >> Installing Front Bumper

Installing Front Bumper

WARNING: This page is about a different car, the 2023 Porsche Panamera and 2022 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

Tightening torque for screw on front bumper: > Tightening torque 50 Nm (37 ftlb.) +/- 15 % 

Tightening torque for screw on front bumper: > Tightening torque 6 Nm (4.5 ftlb.) 

scientia non olet · About LEMON Manuals