Subsequent Work (V6 Monoturbo)

1. 1.1 Push pressure hose -1-  onto the throttle valve and tighten screw-type clamp -2-  to > Tightening torque 5.5 Nm (4 ftlb.) +/- 0.5 Nm (0.4 ftlb.)  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pressure hose on throttle valve

> WM, 137819 REMOVING AND INSTALLING DRIVE BELT (V6)

> CHECKING ENGINE-OIL LEVEL