LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 15 Engine - Cylinder Head, Valve Drive 3.0L Turbo -- 971 - PANAMERA (971) >> WM, 158219 Removing And Installing Cylinder Head Cover >> Technical Values

Technical Values

Location Description Type Basic value Tolerance 1 Tolerance 2
Screws for cylinder head cover on right cylinder bank Replace following removal. Initial tightening 8 Nm (6 ftlb.)    
Screws for cylinder head cover on right cylinder bank Replace following removal. Torque angle + 90°    
Screws for cylinder head cover on left cylinder bank Replace following removal. Initial tightening 8 Nm (6 ftlb.)    
Screws for cylinder head cover on left cylinder bank Replace following removal. Torque angle + 90°    
Screw for stopper on camshaft   Tightening torque 9 Nm (6.5 ftlb.)    
Vacuum line holder M6 screw Tightening torque 9 Nm (6.5 ftlb.)    
scientia non olet · About LEMON Manuals