Technical Values
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Adjustment travel for control rod | Vacuum at 165 - 175 mbar | Set-point value | 8 mm | +/- 1 mm | |
| Adjustment travel for control rod | at a vacuum of 95 - 105 mbar | Set-point value | 3 mm | +/- 1 mm | |
| Nut vacuum modulator | M6 | Tightening torque | 8 Nm (5.9 ftlb.) | ||
| Lock nuts on control rod | Tightening torque | 8 Nm (5.9 ftlb.) |