Installing Pressure Pipe

1. Installation is performed in reverse order. Pay particular attention to the following:
   1. 1.1 Fit new seal on pressure pipe -1-  .
   2. 1.2 Screws -4-  > Tightening torque 9 Nm (6.5 ftlb.)  .
   3. 1.3 Screw-type clamp on pressure hose -2-  > Tightening torque 5.5 Nm (4 ftlb.) +/- 0.5 Nm (0.4 ftlb.)  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pressure pipe