| Brake disc Ø, front |
|
|
420 mm |
|
|
| Brake disc Ø, rear |
|
|
390 mm |
|
|
| Brake disc thickness, front |
|
|
40 mm |
|
|
| Brake disc thickness, rear |
|
|
32 mm |
|
|
| Thickness tolerance of brake disc, max. |
|
|
0.01 mm |
|
|
| Effective brake disc Ø, front |
|
|
324.6 mm |
|
|
| Effective brake disc Ø, rear |
|
|
321.6 mm |
|
|
| Brake pad area per wheel, front |
|
|
330 cm2 |
|
|
| Brake pad area per wheel, rear |
|
|
153.8 cm2 |
|
|
| Pad thickness, front |
Wear limit 2 mm |
|
approx. 8.4 mm |
|
|
| Pad thickness, rear |
Wear limit 2 mm |
|
approx. 11.9 mm |
|
|
| Wear limit of front and rear brake discs |
Measure using VAS 6813 test equipment. Note measuring pre-requisites. New values/wear values and three measuring points are lasered onto the brake disc hub. Wear value reached: Replace PCCB brake discs on both sides of the axle. |
Measured value |
XX/XX Read value on brake disc hub |
|
|
| Thickness tolerance of brake discs (max.) |
|
Measured value |
0.02 mm |
|
|
| Lateral runout of brake disc (max.) |
|
Measured value |
0.03 mm |
|
|
| Lateral runout of wheel hub (max.) |
|
Measured value |
0.03 mm |
|
|
| Lateral runout of brake disc when installed (max.) |
|
Measured value |
0.06 mm |
|
|