Removing (Rear) Sun Blind Motor

NOTE: Voltage peaks

Risk of damage to electrical load or to the control unit
→ Remove the ignition key and switch off load before disconnecting or removing load.

Information

Always comply with the regulations for handling ESD-sensitive components!

Always wear approved work clothes and shoes when carrying out assembly work .
Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation .
Do not touch electric pins and plug contacts .

Release and unplug electric plug connection -3- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Releasing and pulling off electric plug connection
Unscrew screws -2- and remove sun blind motor -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing motor for sun blind