LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> Body & Frame >> Seats >> 72 Seat Frames - Coupe -- 971 - PANAMERA (971) >> WM, 726719 Removing And Installing Rear Backrest Mount >> Installing Load-Through Provision Mount >> Installing Rear Backrest Mount

Installing Rear Backrest Mount

Information 

Replace nuts following removal.

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Screw in and tighten nut on rear backrest mount: > Tightening torque 50 Nm (37 ftlb.) +/- 5 Nm (3.5 ftlb.) 

scientia non olet · About LEMON Manuals