Installing Front Backrest Frame

Information 

Use new screws.

1. Installation is performed in reverse order. Pay particular attention to the following:

   Screw in and tighten screws securing headrest to seat backrest frame > Tightening torque 5 Nm (3.5 ftlb.) +/- 0.2 Nm (0.1 ftlb.) 

   Screw in and tighten screws securing Rear Seat Entertainment holder to seat backrest frame > Tightening torque 4.2 Nm (3.2 ftlb.) +/- 0.1 Nm (0.07 ftlb.)