Installing Striker Pin

1. 1.1 Fit lock peg -1-  and align according to the markings.
2. 1.2 Screw in screws -2-  .
3. 1.3 Carefully close the door and check that the lock peg -1-  is positioned correctly with respect to the door lock.
4. 1.4 Re-align lock peg -1-  if necessary.
5. 1.5 Tighten screws -2-  > Tightening torque 25 Nm (19 ftlb.) 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installing striker pin