Adjusting Lock Peg (Striker Pin)

Information 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Adjusting element for striker pin

• The striker pin can be adjusted by changing the plasticity of the adjusting element in the B-pillar. 
• The setting is retained when the striker pin is removed. 

1. Loosen fastening screws -2-  .
2. Move striker pin outwards.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Adjusting lock peg (striker pin)

   1. 2.1 Move lock peg -1-  outwards using > VAS 6965 - slide hammer kit  .
3. Adjust the lock peg back/down/up.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Adjusting lock peg (striker pin)

   1. 3.1 Move the lock peg -1-  to the required position using a plastic hammer.
4. Carefully close the door and check that the lock peg is positioned correctly with respect to the lock.
5. Screw in and tighten fastening screws -2-  to > Tightening torque 25 Nm (19 ftlb.)  .