Removing Front Left Sub-Part

Information 

When cutting the front electric wire harness, make sure there is enough length of cable left to join to the new electric lines.

1. Unclip locking lugs -Arrow-  and remove cable cover -1-  at the A-pillar.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Cable cover

2. Unclip locking lugs -Arrow-  and remove cable cover -1-  on front inner sill.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Cable cover

3. Unclip main wire harness -1-  at the front inner sill -Arrow-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Main wire harness

4. Disconnect damaged lines as required and take over from the remaining stub.
5. Make sure that all fastenings on the front left sub-part in the interior are disconnected.