LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> Accessories & Equipment >> Wiring System (Data Link Connectors, Pwr Dist., Grnd Dist.) >> 97 Lines -- 971 - PANAMERA (971) >> WM, 970909 Loosening And Securing Main Wire Harness In Luggage Compartment >> Subsequent Work

Subsequent Work

  1. Install heat shields for rear silencer.

    > Removing and installing rear heat shields 

  2. Install heat shields for rear bumper.

    > Removing and installing rear heat shields 

  3. Install fuel tank.

    > Removing and installing fuel tank 

  4. Install rear wheel housing liner.

    > Removing and installing rear wheel housing liner 

  5. Screw in and tighten screws -2-  in covers -3-  > Tightening torque 1.5 Nm (1.1 ftlb.) 
    G15876132Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Luggage compartment covers

  6. Secure the headliner.

    > WM, 708419 REMOVING AND INSTALLING ROOF TRIM PANEL

  7. Install trailer hitch control unit.

    > 669619 REMOVING AND INSTALLING TRAILER HITCH CONTROL UNIT

  8. Install PASM control unit.

    > 431619 REMOVING AND INSTALLING PASM CONTROL UNIT

  9. Install (lower part of) C-pillar trim panel.

    > 706819 REMOVING AND INSTALLING (LOWER PART OF) C-PILLAR TRIM PANEL

  10. Install tail light.

    > 943119 REMOVING AND INSTALLING TAIL LIGHT

  11. Secure fuse box in the luggage compartment.

    > 978409 LOOSENING AND SECURING FUSE BOX IN THE LUGGAGE COMPARTMENT 

  12. Connect cable for fuse elements and B+ line and close power distributor (main fuse box).

    > WM, 978919 REMOVING AND INSTALLING 48-VOLT POWER DISTRIBUTOR 

  13. Install (centre) luggage compartment trim panel (luggage compartment cover).

    > 700619 REMOVING AND INSTALLING (CENTRE) LUGGAGE COMPARTMENT TRIM PANEL (LUGGAGE COMPARTMENT COVER)

  14. Install (side) luggage compartment trim panel (luggage compartment cover).

    > 700619 REMOVING AND INSTALLING (SIDE) LUGGAGE COMPARTMENT TRIM PANEL (LUGGAGE COMPARTMENT COVER)

  15. Connect the battery.

    > Work instructions after disconnecting the battery