Gap Dimensions For Rear Lid

WARNING: This page is about a different car, the 2018 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Rear lid/rear spoiler to roof	R1 (gap)	Gap dimension	6 mm	+/-1.1 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Rear lid/rear spoiler
Rear lid/rear spoiler to roof	R2 (offset)	Gap dimension	-1.5 mm	+/-1.1 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Rear lid/rear spoiler to roof
Rear lid to side panel	R3 (gap)	Gap dimension	4 mm	+0.7 mm	-0.9 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Rear lid to side panel
Rear lid to side panel	R3b (offset)	Gap dimension	0 mm	+/-0.6 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Rear lid to side panel
Rear lid to rear apron	R4 (gap)	Gap dimension	4 mm	+/-0.8 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Rear lid to rear apron