Technical Values
WARNING: This page is about a different car, the 2018 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Front side member | Layer thickness | 1, 000 μm | +300 μm | ||
| Floor section, left & right | Layer thickness | 1, 000 μm | +300 μm | ||
| Bracket, left & right | Layer thickness | 1, 000 μm | +300 μm | ||
| Rear end section reinforcement, left & right | Layer thickness | 1, 000 μm | +300 μm | ||
| End bracket, left & right | Layer thickness 18 | 1, 000 μm | +300 μm | ||
| Battery console | Layer thickness | 200 μm | +200 μm | ||
| Closing element, left & right | Layer thickness | 500 μm | +200 μm | ||
| Reinforcement, left & right | Layer thickness | 500 μm | +200 μm | ||
| Spring strut mount, left & right | Layer thickness | 500 μm | 200 μm | ||
| Wheel housing extension | Layer thickness | 500 μm | 200 μm | ||
| Damper housing | Layer thickness | 500 μm | +200 μm |